P.T.M. TRANSFER PAPER & RELEASE FILM (4" X 6")
£12.00
The small 4"(10cm) x 6" (15cm) Transfer Paper and 2X-Sided Release Film pack was specifically intended to provide a Transfer Paper option that would minimize the amount of cutting you would typically have to do for smaller Prosthetic Transfers. This size will more than likely cover 90% of the average Prosthetic Transfers you'll be making and can always be cut down to better utilize your material for extra small transfers, like bullet holes or bumps.
*10X sheets per pack.
Steps on how to create a tattoo transfer:
Using an laser printer, print your image on the shiny side of the thick "paper".
Cut around the image.
Apply adhesive (Prosaide Original for example) to the image side of the tattoo, coating the entire image and surrounding area, and allow to dry.
Place the tattoo, image side down to the skin and press a wet sponge against the tattoo. Press down from the centre outwards to help release the image from the paper.
Remove the paper and allow the tattoo to dry.
Seal with a matter sealing spray.
*Please note, the clear film is for use with prosthetics and won't be required if you're using the paper for tattoo making.
